What is Xiaomi Redmi 14C ISP Pinout?
First of all, it should be pointed out what ISP pinouts are. The ISP EMMC pinout is a set of connectors on the smartphone mainboard that provides direct interaction with the memory chip in your phone. Such an interface is highly essential when conducting several repair and data recovery processes of failed or damaged storage devices.
Redmi 14C ISP EMMC Pinout Image:
Now that we have the test point image, let’s go ahead to see some of the key pinout connections on the Xiaomi Redmi 14C. Understanding these will be helpful in doing successful ISP EMMC operations. Some of the notable pinouts on the Redmi 14C are the following:
1. VCCQ: This pin provides power to the flash memory.
2. CLK: The clock pin ensures synchronized data transfer between the device and the storage chip.
3. CMD: The command pin is responsible for initiating read and write commands to the storage.
4. DAT0-DAT7: These pins facilitate data transfer to and from the flash memory.
The Easy Jtag Plus and UFI Box dongles are highly recommended for fixing a dead boot on any phone including Xiaomi Redmi 14C. These boxes are particularly useful when phones are flashed with the wrong firmware that prevents the start-up screen from appearing. To repair the boot, you will need these boxes. Additionally, some phone brands do not allow the removal of various locks such as PIN, pattern, password, FRP, and MDM. However, these boxes enable you to remove these locks with ease.
How To Remove Xiaomi Redmi 14C FRP Lock Using UFI Dongle:
- Check “Direct eMMC (ISP)”
- Then Click on “Identify eMMc.
- Connect your Xiaomi Redmi 14C to the PC via a USB cable.
- Head over to the PC and open Device Manager.
- If your device is located there, run the UFi Box.
- Go to USERAREAPART
- Now Click on Special Task ► [Huawei MasterClear ► Wipe Data Only
- Now Click on Special Task ► Clear FRP Lock
- Done.
0 Comments